Note: This is the 2019鈥�2020 eCalendar. Update the year in your browser's URL bar for the most recent version of this page, or .
Program Requirements
The program consists of a minimum of 45 credits, of which, depending on the student's home department, a minimum of 5 and a maximum of 15 may be allotted to the research project. The balance of 30 to 40 credits is earned by coursework. The Department also allows students to complete the program using a minimum of 45 credits of coursework only.
The Environmental Engineering option is administered by the Faculty of Engineering. Further information may be obtained from the Program Coordinator, Department of Civil Engineering and Applied Mechanics.
Research Project
(0 or 5-15 credits)
The program may include a project or, with Departmental approval, may be completed with courses only.
Required Courses (6 credits)
-
CHEE 591 Environmental Bioremediation (3 credits)
Overview
Chemical Engineering : The presence and role of microorganisms in the environment, the role of microbes in environmental remediation either through natural or human-mediated processes, the application of microbes in pollution control and the monitoring of environmental pollutants.
Terms: Winter 2020
Instructors: Yerushalmi, Laleh (Winter)
(3-0-6)
-
CIVE 615 Environmental Engineering Seminar (3 credits)
Overview
Civil Engineering : The course will expose the students to various environmental engineering issues. Lectures will be given by faculty and invited speakers from industry. Each student is required to prepare a written technical paper and make oral presentation.
Terms: Fall 2019
Instructors: Liu, Jinxia; Ozcer, Pinar (Fall)
Complementary Courses
(24-39 credits)
a minimum of 22 credits chosen from the following:
Data analysis:
-
AEMA 611 Experimental Designs 1 (3 credits)
Overview
Mathematics (Agric&Envir Sci) : General principles of experimental design, split-plot designs, spatial heterogeneity and experimental design, incomplete block designs and unbalanced designs, analysis of repeated measures, multivariate and modified univariate analyses of variance, central composite designs.
Terms: This course is not scheduled for the 2019-2020 academic year.
Instructors: There are no professors associated with this course for the 2019-2020 academic year.
3 hours lectures and 1 conference
Prerequisite: AEMA 310 or equivalent
-
CIVE 555 Environmental Data Analysis (3 credits)
Overview
Civil Engineering : Application of statistical principles to design of measurement systems and sampling programs. Introduction to experimental design. Graphical data analysis. Description of uncertainty. Hypothesis tests. Model parameter estimation methods: linear and nonlinear regression methods. Trend analysis. Statistical analysis of censored data. Statistics of extremes.
Terms: Winter 2020
Instructors: Nguyen, Van-Thanh-Van (Winter)
(3-0-6)
Prerequisite (Undergraduate): CIVE 302 or permission of instructor
-
PSYC 650 Advanced Statistics 1 (3 credits)
Overview
Psychology : A course in advanced statistics with specialization in experimental design.
Terms: Fall 2019
Instructors: Hwang, Heungsun (Fall)
Toxicology:
-
OCCH 612 Principles of Toxicology (3 credits)
Overview
Occupational Health & Hygiene : General principles of toxicology, routes of toxicant entry, human organs as targets of toxic action, adverse effects, time-course of reactions to toxicants. Risk assessment techniques, in vivo-in vitro toxicity models, links between human population observations and animal, cellular and biochemical models.
Terms: Fall 2019
Instructors: Heroux, Paul (Fall)
Water pollution engineering:
-
CIVE 651 Theory: Water / Wastewater Treatment (4 credits)
Overview
Civil Engineering : Theoretical aspects of the chemistry of water and wastewater treatment. This will include acid-base and solubility equilibria; redox reactions; reaction kinetics; reactor design; surface and colloid chemistry; gas transfer; mass transfer; stabilization and softening; disinfection; corrosion.
Terms: Winter 2020
Instructors: Liu, Jinxia (Winter)
-
CIVE 652 Bioprocesses for Wastewater Resource Recovery (4 credits)
Overview
Civil Engineering : Technologies and design approaches for reclaiming water, nutrients, carbon and energy, while achieving protection of human and environmental health in the context of enhancing sustainability. Unit processes for both wastewater and solids-handling trains. Advanced mathematical modeling to describe suspended-growth and attached-growth multispecies bioreactors for aerobic, anaerobic and phototrophic processes. Microbial diversity in different reactor conditions, and specific population metabolisms explaining important stoichiometries and kinetics. Advanced molecular microbiology techniques to document microbial diversity and dynamics. Bioreactor designs in the context of stakeholder interactions and energy efficiency.
Terms: Fall 2019
Instructors: Frigon, Dominic (Fall)
-
CIVE 660 Chemical and Physical Treatment of Waters (4 credits)
Overview
Civil Engineering : Theory and design of specific processes used for the physical and/or chemical purification of waters and wastewaters, including mixing, flocculation, sedimentation, flotation, filtration, disinfection, adsorption, ion exchange, aeration, membrane processes, distillation, removal of specific inorganics and organics, taste and odour control, process control, sludge treatment. Laboratory exercises will complement theoretical aspects.
Terms: This course is not scheduled for the 2019-2020 academic year.
Instructors: There are no professors associated with this course for the 2019-2020 academic year.
Air pollution engineering:
-
MECH 534 Air Pollution Engineering (3 credits)
Overview
Mechanical Engineering : Pollutants from power production and their effects on the environment. Mechanisms of pollutant formation in combustion. Photochemical pollutants and smog, atmospheric dispersion. Pollutant generation from internal combustion engines and stationary power plants. Methods of pollution control (exhaust gas treatment, absorption, filtration, scrubbers, etc.).
Terms: Fall 2019
Instructors: Frost, David (Fall)
Soil and water quality management:
-
BREE 533 Water Quality Management (3 credits)
Overview
Bioresource Engineering : Management of water quality for sustainability. Cause of soil degradation, surface and groundwater contamination by agricultural chemicals and toxic pollutants. Screening and mechanistic models. Human health and safety concerns. Water table management. Soil and water conservation techniques will be examined with an emphasis on methods of prediction and best management practices.
Terms: Fall 2019
Instructors: Madramootoo, Chandra A (Fall)
Restriction: Not open to students who have taken BREE 625 (formerly ABEN 625).
This course carries an additional charge of $32.11 to cover the cost of transportation with respect to a field trip. The fee is refundable only during the withdrawal with full refund period.
Management of water quality for sustainability. Cause of soil degradation, surface and groundwater contamination by agricultural chemicals and toxic pollutants. Screening and mechanistic models. Human health and safety concerns. Water table management. Soil and water conservation techniques will be examined with an emphasis on methods of prediction and best management practices.
-
CIVE 686 Site Remediation (4 credits)
Overview
Civil Engineering : Field investigations; geotechnical and geophysical techniques; hydrogeological conditions; risk assessment; contaminant transport; remedial action plan; containment systems (gas, surface water, and ground water); on-site and off-site treatment techniques (solidification, stabilization, landfilling, and soil washing); In-situ treatment techniques (physical, biological, and chemical).
Terms: This course is not scheduled for the 2019-2020 academic year.
Instructors: There are no professors associated with this course for the 2019-2020 academic year.
Environmental impact:
-
GEOG 501 Modelling Environmental Systems (3 credits)
Overview
Geography : Most problems in environmental science deal with weak relationships and poorly defined systems. Model development and simulation will be used in this course to help improve understanding of environmental systems. Simulation of environmental systems is examined, focusing on problem definition, model development and model validation.
Terms: Fall 2019
Instructors: Roulet, Nigel Thomas (Fall)
Fall
1.15 hours lecture, 0.58 hours seminar, 0.69 hours project, 0.58 hours laboratory
Restriction: open only to U2 or U3 students who have completed six or more credits from courses at the 300 level of Atmospheric and Oceanic Sciences, Biology, Chemistry, Earth and Planetary Sciences, Geography, Natural Resource Sciences, or a 不良研究所 School of Environment domain, or permission of the instructor
Prerequisites: MATH 139 or MATH 140, MATH 141, and MATH 203, or equivalent
Enrolment limited to 20 students by availability of workstations
-
GEOG 551 Environmental Decisions (3 credits)
Overview
Geography : This course deals with the role of geographic information, paradigms and modes of analysis - including but not restricted to GIS - in environmental impact assessment and decision making. The focus will be on community-based decision making, particularly where conservation issues are involved. Cross-cultural situations, developing areas and the role of non-government organizations.
Terms: This course is not scheduled for the 2019-2020 academic year.
Instructors: There are no professors associated with this course for the 2019-2020 academic year.
Environmental policy
-
URBP 506 Environmental Policy and Planning (3 credits)
Overview
Urban Planning : Analytical and institutional approaches for understanding and addressing environmental issues at various scales; characteristics of environmental issues, science-policy-politics interactions relating to the environment, and implications for policy; sustainability, and the need for and challenges associated with interdisciplinary perspectives; externalities and their regulation; public goods; risk perception and implications; the political-institutional context and policy instruments; cost-benefit analysis; multiple-criteria decision-making approaches; multidimensional life-cycle analysis; policy implementation issues; conflict resolution; case studies.
Terms: Fall 2019
Instructors: Badami, Madhav Govind (Fall)
(3-0-6)
Restriction: This course is open to students in U3 and above
Elective Courses
Also, 0-15 credits of graduate courses from an approved list of courses from the Faculties of Engineering, Agricultural and Environmental Sciences, Law, Management; Departments of Atmospheric and Oceanic Sciences, Biology, Chemistry, Earth and Planetary Sciences, Economics, Epidemiology and Biostatistics, Geography, Occupational Health, Political Science, Religious Studies, Sociology, and 不良研究所 School of Environment.
